test: PDF洗MD v3 — 截图增强版（12页测试）

2.1_Application_program_status_register_p21.md

@@ -0,0 +1,20 @@
+来源：PM0214 Rev 10，Page 21
+
+## Application program status register
+
+The APSR contains the current state of the condition flags from previous instruction executions. See the register summary in Table 3 on page 18 for its attributes. The bit assignment is:
+
+**Table 5. APSR bit definitions**
+
+| Bits | Description |
+|------|-------------|
+| Bit 31 | N: Negative or less than flag: 0: Operation result was positive, zero, greater than, or equal; 1: Operation result was negative or less than. |
+| Bit 30 | Z: Zero flag: 0: Operation result was not zero; 1: Operation result was zero. |
+| Bit 29 | C: Carry or borrow flag: 0: Add operation did not result in a carry bit or subtract operation resulted in a borrow bit; 1: Add operation resulted in a carry bit or subtract operation did not result in a borrow bit. |
+| Bit 28 | V: Overflow flag: 0: Operation did not result in an overflow; 1: Operation resulted in an overflow. |
+| Bit 27 | Q: DSP overflow and saturation flag: Sticky saturation flag. 0: Indicates that saturation has not occurred since reset or since the bit was last cleared to zero; 1: Indicates when an SSAT or USAT instruction results in saturation, or indicates a DSP overflow. This bit is cleared to zero by software using an MRS instruction. |
+| Bits 26:20 | Reserved. |
+| Bits 19:16 | GE[3:0]: Greater than or Equal flags. See SEL on page 105 for more information. |
+| Bits 15:0 | Reserved. |
+
+> 原始图片：imgs/page_21_cover.png（无图则注明无图）